UPPSPEL/GRUPPSPEL gaming desk and chair, black/grey, 140x80 cm

Do you usually sit or stand when playing, or something in between? You can pre-set this desk at 4 height positions and easily change the height with the touch of a button.

The height of the electric underframe can be adjusted from 72 to 120 cm, so you can always sit or stand at a comfortable height.

You can position the table top in two different ways. If you have the contour shape facing forwards, you enjoy relief for forearms and wrists – and having it at the back creates a gap where you can lead all the cables down.

It should be comfortable to play, especially when a match drags on. That’s why the table top is deep – so you can position screens at a comfortable distance from your eyes.

You can charge 1 device in the controller’s built-in USB port.

Durable, hardwearing and matte surface that is easy on your eyes since the light reflection is low.

It’s easy to keep the desk neat and tidy by using the cable management tray under the table top.

The chair gives your back a comfortable support that helps you sit ergonomically correct since the backrest can be adjusted in 5 different heights and has a built-in lumbar support.

You can adjust the resistance of the tilt function to suit your movements and weight – and also lock it in the most comfortable position.

High-quality density foam will keep the chair comfortable for many years to come.

When you need a moment to relax, you can lean your head against either side of the headrest.

You can adjust the height of the headrest and move it both forwards and backwards to enjoy support precisely where your head needs it during matches and breaks.

The safety castors have a pressure-sensitive brake mechanism that keeps the chair in place when you stand up, and releases automatically when you sit down.

The castors are rubber coated to run smoothly on any type of floor.

The cover is fixed, very resistant to abrasion and easy to clean using the soft brush attachment on your vacuum.

Good to know

This chair has been tested for office use and meets the requirements for durability and stability set forth in the following standards: EN 1335 and ANSI/BIFMA x5.1.

Material

Fibreboard, Acrylic paint, Printed acrylic paint, Printed acrylic paint

Part 01:Steel, Epoxy/polyester powder coating, Polypropylene plastic

Part 02/ Part 05/ Part 06:Steel, Epoxy/polyester powder coating, Synthetic rubber

Part 03:Steel, Epoxy/polyester powder coating, Synthetic rubber, Steel

Part 04/ Part 09:Steel, Epoxy/polyester powder coating

Part 07:Steel, Galvanized

Part 08:Steel, Synthetic rubber, Steel, Epoxy/polyester powder coating

Headrest:Reinforced polyamide plastic, Zinc, Polypropylene plastic

Back frame:Steel, Polypropylene plastic, Reinforced polyamide plastic, Zinc

Back bar:Steel, Epoxy/polyester powder coating

Armrest pad:Polypropylene plastic

Armrest frame:Reinforced polyamide plastic, Polypropylene plastic

Seat frame:Polypropylene plastic, Steel

Foam:Highly resilient polyurethane foam (cold foam) 60 kg/cu.m., Polyurethane foam 35 kg/cu.m.

Star base:Aluminium, Epoxy/polyester powder coating

Fabric:100 % polyester

Coated fabric:100% polyurethane, 75% polyester, 25% cotton

Fabric:100% polyester (min. 90% recycled)