PAX PAX corner wardrobe, grey-beige-oak effect, 231/161x201 cm

10 year guarantee. Read about the terms in the guarantee brochure.

PAX end-unit has a simple and timeless design that is easy to personalise by adding boxes, baskets and lighting.

Want to be even more prepared for tomorrow's outfit? This end-unit can be used for clothes you plan to wear again soon or for airing clothes before placing them back in your PAX wardrobe.

You can easily adapt this ready-made PAX/KOMPLEMENT combination to suit your needs and taste using the PAX planning tool.

Adjustable feet make it possible to compensate any irregularities in the floor.

If you want to organise inside you can complement with interior organisers from the KOMPLEMENT series.

With the PAX Planner, you can easily complete your combination with integrated lighting. After choosing the light source, the planner will work out which accessories you need to complete the solution.

Open this solution in the PAX planner to change it to fit your needs. Another drawer? Less ones? Add a frame or change doors? No problems.

Good to know

This furniture must be fixed to the wall with the enclosed wall fastener.

Different wall materials require different types of fixing devices. Use fixing devices suitable for the walls in your home, sold separately.

Two persons are needed for the assembly of this furniture.

The frame can be assembled in an upright position if your ceiling height is a minimum of 202 cm. Follow the assembly instructions in the package.

Interior accessories that help you organise inside your wardrobe are sold separately.

The clothes rail holds about 30 shirts on hangers.

Wipe clean with a cloth dampened in a mild cleaner.

Wipe dry with a clean cloth.

Wipe dry with a clean cloth.

Material

Fibreboard, Particleboard, Paper foil

Steel, Epoxy/polyester powder coating

Partition:Particle- and fibreboard with honeycomb paper filling (100% recycled paper), Paper foil, Plastic edging, Plastic edging

Bottom panel:Particleboard, Paper foil

Top panel:Particleboard, Paper foil, Plastic edging, Plastic edging

Drawer front:Particleboard, Paper foil, Plastic edging, Plastic edging

Drawer side/ Drawer back:Particleboard, Paper foil

Drawer bottom:Fibreboard, Acrylic paint

Drawer front:Fibreboard, Paper foil, Plastic edging, Plastic edging

Drawer side/ Drawer back:Particleboard, Paper foil

Drawer bottom:Fibreboard, Acrylic paint

Inside frame:Tempered glass

Frame:Fibreboard, Paper foil

Rail:Fibreboard, Paper foil

Bottom panel:Fibreboard, Tinted clear lacquer

User surface:100% polyester (min. 70% recycled)

Rail:Fibreboard, Paper foil

Bottom panel:Fibreboard, Tinted clear lacquer

Basematerial:Steel, Pigmented epoxy/polyester powder coating

Wheel:Acetal plastic

Drawer front/ Drawer side/ Drawer back:Fibreboard, Paper foil, Plastic edging

Drawer bottom:Fibreboard, Paper foil

Frame:Fibreboard, Paper foil

Clothes rail:Steel, Epoxy powder coating

Particleboard, Paper foil

Particleboard, Fibreboard, Paper foil

Top panel/ Shelf/ Plinth front:Particleboard, Paper foil

Side panel:Particleboard, Paper foil, Plastic edging

Plinth back:Particleboard

Back panel:Fibreboard, Paper foil

Clothes rail:Epoxy/polyester powder coating, Steel