How often do you run out of batteries just when you need them? This problem is easily fixed by switching to rechargeable ones. In LITOSFÄR you can both charge and store batteries – the best of both worlds!
If you’re a frequent user of alkaline batteries, over time you can save money, reduce waste and your impact on the environment by switching to LADDA rechargeable batteries and recharge them with LITOSFÄR.
LITOSFÄR is a practical battery charger and battery storage in one.
8 separate charging slots make it possible to charge 1-8 rechargeable batteries at the same time, and to mix AA and AAA batteries.
In the storage compartment on the left side, you can store up to 8 AA batteries and 4 AAA batteries, so you always have extra batteries close at hand when needed.
After the batteries are fully charged and the charger remains connected to a power outlet, it will go into trickle charging. Batteries can be stored in the charging slots without discharging.
This battery charger is made of 50% recycled plastic.
Good to know
Charge only Ni-MH type rechargeable batteries with minimum capacity 500mAh (AAA) or 1000mAh (AA).
Do not attempt to charge non-rechargeable batteries.
For indoor use only.
Regularly examine for damage of cord, plug, enclosure and other parts. In the event of such damage, the product must not be used with the charger.
This product bears the CE mark.
Observe the polarity marks plus (+) and minus (−) and ensure correct battery insertion into charger or product.
LED indicator shows charging status.
Charger operating temperature: 0°C to 40°C.
Devices may get warm during charging; this is completely normal and they will gradually cool down again after they are fully charged.
Charging time may vary based on the device’s battery capacity, charge level, the age of the battery and the temperature in the surrounding area.
IKEA recommends LADDA rechargeable batteries.
Special waste handling may be required. Please contact your local authorities for more information.
The charger must be connected to a power outlet for trickle charging to work during storage.
Charge is terminated by individual minus delta or zero delta voltage detection (-dV/dT or 0dV/dT).