This pleated blind can be mounted in any way to block out light from the moon, sun or street lamps. Pull from top to bottom or from bottom to top – or just cover a section in the middle of the window
Suitable for rooftop windows, tilt windows and turn windows.
Can be cut to the desired width.
The blind can be cut and re-cut to fit a smaller window. Ensure that you do not exceed maximum cut length.
Drill-free mounting using the 4 included brackets with adhesive tape. The adhesive has been tested and approved for smooth glass surfaces.
The assembly instructions include a table with numbers corresponding to those on the fabric and rails to facilitate precise measuring and cutting.
The rails at the top and bottom allow you to mount the pleated blind precisely, covering any gap.
Easy to maneuver using either of the plastic handles at the top or bottom.
Depending on your needs, you can pull the blind from the top down or from the bottom up. You can also adjust the blind so it only covers a section in the middle.
Block-out blinds blocks light from shining through and completely darkens your room.
Good to know
Highly recommended to attach to surfaces made of glass.
For window frames or surfaces not recommended for the adhesive, mount the brackets with screws using a drill or screwdriver. The brackets are prepared with small holes for this purpose.
To reposition or reuse on another window, remove adhesive-mounted brackets with plastic hand scraper. Replace with new brackets available cost-free at IKEA stores or contact IKEA Customer Services for help.
For door windows or windows taller than 130 cm, mount 2 pleated blinds to cover the whole surface.
A darker environment stimulates production of the body's natural sleep hormone, melatonin. The hormone helps to regulate the body's sleep-wake cycle and can encourage better sleep.
Suitable for rooftop windows, tilt windows and turn windows.
The top rail of the 60 cm wide blind can be cut max. 40 cm.
If you need to adapt the dimensions of the pleated blind to your window, cut the top/bottom rails and the rods with a metal saw. Cut the fabric with a safety knife.
The included tool makes it easier to get straight, accurate lines when adapting the size of your rail/rod/fabric. It also protects your fingers.
For a smooth, friction-free glide, apply a few drops of silicone spray lubricant to the lock mechanism in the brackets. Ensure the spray is suitable for plastic and metal.
Can also be used in bathrooms.
Long Term Benefits
In the playful minds of children, dangling cords on blinds easily become a necklace, a climbing rope or a lasso, putting them at risk. To keep our little ones out of harm’s way, all our blinds are cordless or fitted with non-accessible cords.
HORNVALLMO come as block-out or light filtering pleated blinds. They can be mounted in many ways to create privacy or the perfect ambience. Pull from top to bottom, or from bottom to top – or just cover a section in the middle of the window. Can be cut to fit different window types/sizes. Attaches firmly to glass surfaces with adhesive tape. For window frames or surfaces other than glass, mount the brackets with screws using drill or screwdriver. How clever isn’t that?
HORNVALLMO pleated blinds can be mounted in many ways. You can attach the brackets firmly to the glass using the included adhesive tape or you can mount the brackets on the window frame using screws and drill or screwdriver.
HORNVALLMO pleated blind can be mounted to pull from top to bottom or from bottom to top. Perfect for roof windows, tilt windows and turn windows in any room, including bathrooms that tend to get humid.
To suit your style and needs, we have a wide variety of roller blinds, roman blinds, cellular blinds as well as pleated blinds that you can pull from top to bottom or from bottom to top. We also have smart/wireless blinds. All our blinds are either cordless or have cords embedded into the design to ensure no dangling loops and safe use by all ages.